|Place of Origin:Zhejiang, China||Pressure:Low|
|Material:Steel||Use:butane, iso-butane and propane mixed|
|Item:Gas cartridge and fuel bottle 230G size for camping||Accessory type:fuel butane cartridge|
|Type:Other accessories||Printing:Heat transfer printing|
|Burst pressure:20 bar||Volume:410ml|
Mapp gas is a mixture of various hydrocarbons, principally, methylacetylene , propadiene and Propane(MAPP). It produces a relatively hot flame (2,976°C) with a high heat release in the primary flame (inner cone) (15,445kJ/m 3 ), less than for acetylene (18,890kJm 3 ) but much higher than for propane (10,433kJm 3 ). The secondary flame (outer cone) also gives off a high heat release, similar to propane and natural gas. The combination of a lower flame temperature, more distributed heat source and larger gas flows compared with acetylene results in a substantially slower pierce time.
1.Press tip vertically downward into center of refill valve
2.Apply firm pressure until lighters is full
3.Release tip and replace cap
1. Are you manufacturer or trading company?
We are manufacturer and have production experience over ten years.
2. What is about the MOQ? I can buy your product less than MOQ?
As aerosol products belong to dangerous cargo, they are not allowed to be shipped by LCL. They should be shipped by full container. So the MOQ normally must be at least one 20FT container. But if you can pay the charges for all the things involved in export, the order quantity can be less.
Copyright © 2017 - 2020Shandong Meizi Fine Chemicals Co., Ltd. All Rights Reserved